- Qt 6.7
- Qt WebEngine
- QML Types
- WebEngineView
- Qt 6.7.2 Reference Documentation

# WebEngineView QML Type

A WebEngineView renders web content within a QML application. More...

Import Statement: | import QtWebEngine
Since: | QtWebEngine 1.0
Inherits: | Item

- List of all members, including inherited members
- Deprecated members

## Properties

- ErrorDomain : enumeration
- Feature : enumeration
- FindFlags : enumeration
- JavaScriptConsoleMessageLevel : enumeration
- LifecycleState : enumeration `(since QtWebEngine 1.10)`
- LoadStatus : enumeration
- PrintedPageOrientation : enumeration `(since QtWebEngine 1.3)`
- PrintedPageSizeId : enumeration `(since QtWebEngine 1.3)`
- RenderProcessTerminationStatus : enumeration `(since QtWebEngine 1.2)`
- WebAction : enumeration `(since QtWebEngine 1.2)`
- activeFocusOnPress : bool `(since QtWebEngine 1.2)`
- audioMuted : bool `(since QtWebEngine 1.3)`
- backgroundColor : color `(since QtWebEngine 1.2)`
- canGoBack : bool
- canGoForward : bool
- contentsSize : size `(since QtWebEngine 1.3)`
- devToolsId : WebEngineView `(since QtWebEngine 6.6)`
- devToolsView : WebEngineView `(since QtWebEngine 1.7)`
- history : WebEngineHistory `(since QtWebEngine 1.1)`
- icon : url
- inspectedView : WebEngineView `(since QtWebEngine 1.7)`
- isFullScreen : bool `(since QtWebEngine 1.1)`
- lifecycleState : LifecycleState `(since QtWebEngine 1.10)`
- loadProgress : int
- loading : bool
- profile : WebEngineProfile `(since QtWebEngine 1.1)`
- recentlyAudible : bool `(since QtWebEngine 1.3)`
- recommendedState : LifecycleState `(since QtWebEngine 1.10)`
- renderProcessPid : qint64 `(since QtWebEngine 1.11)`
- scrollPosition : point `(since QtWebEngine 1.3)`
- settings : WebEngineSettings `(since QtWebEngine 1.1)`
- title : string
- touchHandleDelegate : Component `(since QtWebEngine 6.4)`
- url : url
- userScripts : WebEngineScriptCollection `(since QtWebEngine 1.1)`
- webChannel : QQmlWebChannel `(since QtWebEngine 1.1)`
- webChannelWorld : int `(since QtWebEngine 1.3)`
- zoomFactor : real `(since QtWebEngine 1.1)`

## Signals

- activeFocusOnPressChanged(bool activeFocusOnPress) `(since QtWebEngine 1.2)`
- audioMutedChanged(bool muted) `(since QtWebEngine 1.3)`
- authenticationDialogRequested(AuthenticationDialogRequest request) `(since QtWebEngine 1.4)`
- backgroundColorChanged() `(since QtWebEngine 1.2)`
- certificateError(WebEngineCertificateError error) `(since QtWebEngine 1.1)`
- colorDialogRequested(ColorDialogRequest request) `(since QtWebEngine 1.4)`
- contextMenuRequested(ContextMenuRequest request) `(since QtWebEngine 1.4)`
- featurePermissionRequested(url securityOrigin, Feature feature) `(since QtWebEngine 1.1)`
- fileDialogRequested(FileDialogRequest request) `(since QtWebEngine 1.4)`
- findTextFinished(FindTextResult result) `(since QtWebEngine 1.10)`
- fullScreenRequested(FullScreenRequest request) `(since QtWebEngine 1.1)`
- geometryChangeRequested(rect geometry, rect frameGeometry) `(since QtWebEngine 1.7)`
- javaScriptConsoleMessage(JavaScriptConsoleMessageLevel level, string message, int lineNumber, string sourceID)
- javaScriptDialogRequested(JavaScriptDialogRequest request) `(since QtWebEngine 1.4)`
- linkHovered(url hoveredUrl)
- loadingChanged(WebEngineLoadingInfo loadingInfo)
- navigationRequested(WebEngineNavigationRequest request)
- newWindowRequested(WebEngineNewWindowRequest request) `(since QtWebEngine 2.0)`
- pdfPrintingFinished(string filePath, bool success) `(since QtWebEngine 1.5)`
- printRequested() `(since QtWebEngine 1.8)`
- recentlyAudibleChanged(bool recentlyAudible) `(since QtWebEngine 1.3)`
- registerProtocolHandlerRequested(RegisterProtocolHandlerRequest request) `(since QtWebEngine 1.7)`
- renderProcessPidChanged(qint64 pid) `(since QtWebEngine 1.11)`
- renderProcessTerminated(RenderProcessTerminationStatus terminationStatus, int exitCode) `(since QtWebEngine 1.2)`
- selectClientCertificate(WebEngineClientCertificateSelection clientCertificateSelection) `(since QtWebEngine 1.9)`
- tooltipRequested(TooltipRequest request) `(since QtWebEngine 1.10)`
- touchSelectionMenuRequested(TouchSelectionMenuRequest *request) `(since QtWebEngine 6.3)`
- wasRecentlyAudibleChanged(bool wasRecentlyAudible) `(since QtWebEngine 1.3)`
- webAuthUxRequested(QWebEngineWebAuthUxRequest *request) `(since QtWebEngine 6.7)`
- windowCloseRequested() `(since QtWebEngine 1.2)`

## Methods

- void acceptAsNewWindow(QWebEngineNewWindowRequest *request) `(since QtWebEngine 2.0)`
- WebEngineAction action(WebAction action)
- void findText(string subString) `(since QtWebEngine 1.1)`
- void findText(string subString, FindFlags options) `(since QtWebEngine 1.1)`
- void findText(string subString, FindFlags options, variant resultCallback) `(since QtWebEngine 1.1)`
- void fullScreenCancelled() `(since QtWebEngine 1.1)`
- void goBack()
- void goBackOrForward(int offset) `(since QtWebEngine 1.1)`
- void goForward()
- void grantFeaturePermission(url securityOrigin, Feature feature, bool granted) `(since QtWebEngine 1.1)`
- void loadHtml(string html, url baseUrl)
- void printToPdf(const string filePath, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation) `(since QtWebEngine 1.3)`
- void printToPdf(variant resultCallback, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation) `(since QtWebEngine 1.3)`
- void reload()
- void reloadAndBypassCache() `(since QtWebEngine 1.1)`
- void replaceMisspelledWord(const QString &replacement) `(since QtWebEngine 1.3)`
- void runJavaScript(string script, variant callback)
- void save(const QString &filePath, QWebEngineDownloadRequest::SavePageFormat format) `(since QtWebEngine 6.6)`
- void setActiveFocusOnPress(bool arg) `(since QtWebEngine 1.2)`
- void stop()
- void triggerWebAction(WebAction action) `(since QtWebEngine 1.2)`

## Detailed Description

The WebEngineView type enables QML applications to render regions of dynamic web content. It may share the screen with other QML types, such as a TabView, or fill the screen, as specified within the QML application.

### Initializing Web Engine

For the web engine view to be rendered, the web engine must be initialized by using QtWebEngineQuick::initialize in the application main source file, as illustrated by the following code snippet:

     int main(int argc, char *argv[])
     {
         QCoreApplication::setAttribute(Qt::AA_ShareOpenGLContexts);
         QtWebEngineQuick::initialize();
         QGuiApplication app(argc, argv);
         QQmlApplicationEngine engine;
         engine.load(QUrl(QStringLiteral("qrc:/main.qml")));
         return app.exec();
     }

### Loading Web Pages

An application can load pages into the WebEngineView, using either the url property or the loadHtml method and navigate within the view's session history. The GET method is always used to load URLs.

The history is represented by a WebEngineHistory data model that is held by the history property.

The following sample QML application loads a web page using the `url` property:

     import QtQuick
     import QtQuick.Window
     import QtWebEngine

     Window {
         width: 1024
         height: 750
         visible: true
         WebEngineView {
             anchors.fill: parent
             url: "https://www.qt.io"
         }
     }

The loading property holds whether an HTML page is currently loading. The loadingChanged() signal is emitted when loading the page begins, ends, or fails.

The title of an HTML page can be accessed with the title property. Additionally, a web page may specify an icon, which can be accessed using the icon property. The zoomFactor property enables zooming the contents of the web page by a scale factor.

If a certificate error is raised while loading a web page, the certificateError() signal is emitted. Certificate errors are handled by using the methods of the WebEngineCertificateError type.

### Interaction

By default, links to different pages load within the same WebEngineView object, but web sites may request them to be opened as a new tab, window, or dialog. The newWindowRequested() signal is emitted when a request to load the page in a separate web engine view is issued. The NewViewDestination property describes how the new view should be opened. In addition, the WebEngineNewWindowRequest utility type can be used to load web pages in separate web engine views.

The findText() method can be used to search for a string on a web page, using the options described by FindFlags.

The setActiveFocusOnPress() method can be used to create a UI element that should not get focus on press. This can be useful in a hybrid UI.

The focusOnNavigationEnabled setting can be used to make the view automatically receive focus when a navigation operation occurs (like loading or reloading a page or navigating through history).

The linkHovered() signal is emitted when a mouse pointer passes over a link and thus corresponds to the `mouseover` DOM event.

Actions, such as selecting and editing content, can be performed on a web page by using the triggerWebAction() method. The available actions are described by the WebAction property.

The backgroundColorChanged() signal is emitted when the web page background color changes.

### User Scripts

During the loading of a page, so called user scripts can be injected in the JavaScript engine at different points. The script objects attached to the web engine view are held by the userScripts property and injected by using the WebEngineScript type. Scripts can also be run by using the runJavaScript() method in the same world as other scripts that are part of the loaded site.

The webChannel property can be used to expose a WebChannel instance in the JavaScript context of the page it is rendering as `qt.webChannelTransport`.

### Fullscreen Mode

A web page can request through the JavaScript API to be loaded in fullscreen mode. The fullScreenRequested() signal is emitted when the web page issues the request. The FullScreenRequest utility type can be used to toggle fullscreen requests. The fullScreenCancelled method can be used to notify the browser engine when the windowing system forces the application to leave fullscreen mode.

### Profiles

Web engine views can be isolated from each other by using the WebEngineProfile type. A profile contains settings, scripts, and the list of visited links shared by all views that belong to the profile. For example, a dedicated profile could be created for a private browsing mode. The current profile for the view is held by the profile property and the current settings are held by the settings property. The settings are specified by using the WebEngineSettings type.

### Platform Features

Web pages can request access to platform features, such as geolocation or audio and video capture devices. The featurePermissionRequested() signal is emitted when a web page requests to make use of a resource. The supported platform features are described by the Feature property. If users grant the permission, the grantFeaturePermission() method is used to set it to granted.

### Rendering to OpenGL Surface

When using a QQuickRenderControl to render a Qt Quick user interface to an OpenGL surface, the WebEngineView type is not rendered correctly. The web engine view attempts to use a global OpenGL context created by QtWebEngineQuick::initialize, but there is no public API for accessing that context in order to share it with the `QQuickRenderControl` context.

To have the web engine view rendered correctly, it is possible to manually create a new offscreen context that is shared with the `QQuickRenderControl` and to call the non-public function `qt_gl_set_global_share_context()`, rather than calling `initialize()`. If `initialize()` is called after setting a global context, it will do nothing.

## Property Documentation

ErrorDomain : enumeration

Describes various high-level error types:

Constant | Description
--- | ---
`WebEngineView.NoErrorDomain` |
`WebEngineView.InternalErrorDomain` | Content fails to be interpreted by Qt WebEngine.
`WebEngineView.ConnectionErrorDomain` | Error results from faulty network connection.
`WebEngineView.CertificateErrorDomain` | Error related to the SSL/TLS certificate.
`WebEngineView.HttpErrorDomain` | Error related to the HTTP connection.
`WebEngineView.FtpErrorDomain` | Error related to the FTP connection.
`WebEngineView.DnsErrorDomain` | Error related to the DNS connection.

Feature : enumeration

Describes the platform feature access categories that the user may be asked to grant or deny access to:

Constant | Description
--- | ---
`WebEngineView.Geolocation` | Location hardware or service.
`WebEngineView.MediaAudioCapture` | Audio capture devices, such as microphones.
`WebEngineView.MediaVideoCapture` | Video devices, such as cameras.
`WebEngineView.MediaAudioVideoCapture` | Both audio and video capture devices.
`DesktopVideoCapture` | Video output capture, that is, the capture of the user's display. (Added in Qt 5.10)
`DesktopAudioVideoCapture` | Both audio and video output capture. (Added in Qt 5.10)
`WebEnginView.Notifications` | Web notifications for the end-user.

See also featurePermissionRequested() and grantFeaturePermission().

FindFlags : enumeration

Describes the options available to the findText() function. The options can be OR-ed together from the following list:

Constant | Description
--- | ---
`WebEngineView.FindBackward` | Searches backwards instead of forwards.
`WebEngineView.FindFlags` | FindCaseSensitively By default findText() works case insensitive. Specifying this option changes the behavior to a case sensitive find operation.

See also findText().

JavaScriptConsoleMessageLevel : enumeration

Indicates the severity of a JavaScript console message:

Constant | Description
--- | ---
`WebEngineView.InfoMessageLevel` | Message is purely informative and can safely be ignored.
`WebEngineView.WarningMessageLevel` | Message indicates there might be a problem that may need attention.
`WebEngineView.ErrorMessageLevel` | Message indicates there has been an error.

LifecycleState : enumeration `[since QtWebEngine 1.10]`

This enum describes the lifecycle state of the page:

Constant | Description
--- | ---
`WebEngineView.LifecycleState.Active` | Normal state.
`WebEngineView.LifecycleState.Frozen` | Low CPU usage state where most HTML task sources are suspended.
`WebEngineView.LifecycleState.Discarded` | Very low resource usage state where the entire browsing context is discarded.

This property was introduced in QtWebEngine 1.10.

See also lifecycleState, Page Lifecycle API, and WebEngine Lifecycle Example.

LoadStatus : enumeration

Reflects a page's load status:

Constant | Description
--- | ---
`WebEngineView.LoadStartedStatus` | Page is currently loading.
`WebEngineView.LoadStoppedStatus` | Loading the page was stopped by the stop() method or by the loader code or network stack in Chromium.
`WebEngineView.LoadSucceededStatus` | Page has successfully loaded, and is not currently loading.
`WebEngineView.LoadFailedStatus` | Page has failed to load, and is not currently loading.

PrintedPageOrientation : enumeration `[since QtWebEngine 1.3]`

Describes the orientation of a PDF document that gets created from the WebEngineView's contents. The enumeration values are mapped from and must match QPageLayout::Orientation.

Constant | Description
--- | ---
`WebEngineView.Portrait` | The document will be created using portrait orientation.
`WebEngineView.Landscape` | The document will be created using landscape orientation.

This property was introduced in QtWebEngine 1.3.

See also WebEngineView::printToPdf().

PrintedPageSizeId : enumeration `[since QtWebEngine 1.3]`

This enum type lists the available page sizes as defined in the Postscript PPD standard.

The enumeration values are mapped from and must match QPageSize::PageSizeId. They are also duplicated in QPagedPaintDevice and QPrinter.

The defined sizes are:

Constant | Description
--- | ---
`WebEngineView.A0` | 841 x 1189 mm
`WebEngineView.A1` | 594 x 841 mm
`WebEngineView.A2` | 420 x 594 mm
`WebEngineView.A3` | 297 x 420 mm
`WebEngineView.A4` | 210 x 297 mm, 8.26 x 11.69 inches
`WebEngineView.A5` | 148 x 210 mm
`WebEngineView.A6` | 105 x 148 mm
`WebEngineView.A7` | 74 x 105 mm
`WebEngineView.A8` | 52 x 74 mm
`WebEngineView.A9` | 37 x 52 mm
`WebEngineView.B0` | 1000 x 1414 mm
`WebEngineView.B1` | 707 x 1000 mm
`WebEngineView.B2` | 500 x 707 mm
`WebEngineView.B3` | 353 x 500 mm
`WebEngineView.B4` | 250 x 353 mm
`WebEngineView.B5` | 176 x 250 mm, 6.93 x 9.84 inches
`WebEngineView.B6` | 125 x 176 mm
`WebEngineView.B7` | 88 x 125 mm
`WebEngineView.B8` | 62 x 88 mm
`WebEngineView.B9` | 44 x 62 mm
`WebEngineView.B10` | 31 x 44 mm
`WebEngineView.C5E` | 163 x 229 mm
`WebEngineView.Comm10E` | 105 x 241 mm, U.S. Common 10 Envelope
`WebEngineView.DLE` | 110 x 220 mm
`WebEngineView.Executive` | 7.5 x 10 inches, 190.5 x 254 mm
`WebEngineView.Folio` | 210 x 330 mm
`WebEngineView.Ledger` | 431.8 x 279.4 mm
`WebEngineView.Legal` | 8.5 x 14 inches, 215.9 x 355.6 mm
`WebEngineView.Letter` | 8.5 x 11 inches, 215.9 x 279.4 mm
`WebEngineView.Tabloid` | 279.4 x 431.8 mm
`WebEngineView.Custom` | Unknown, or a user defined size.
`WebEngineView.A10` |
`WebEngineView.A3Extra` |
`WebEngineView.A4Extra` |
`WebEngineView.A4Plus` |
`WebEngineView.A4Small` |
`WebEngineView.A5Extra` |
`WebEngineView.B5Extra` |
`WebEngineView.JisB0` |
`WebEngineView.JisB1` |
`WebEngineView.JisB2` |
`WebEngineView.JisB3` |
`WebEngineView.JisB4` |
`WebEngineView.JisB5` |
`WebEngineView.JisB6` |
`WebEngineView.JisB7` |
`WebEngineView.JisB8` |
`WebEngineView.JisB9` |
`WebEngineView.JisB10` |
`WebEngineView.AnsiA` | = `Letter`
`WebEngineView.AnsiB` | = `Ledger`
`WebEngineView.AnsiC` |
`WebEngineView.AnsiD` |
`WebEngineView.AnsiE` |
`WebEngineView.LegalExtra` |
`WebEngineView.LetterExtra` |
`WebEngineView.LetterPlus` |
`WebEngineView.LetterSmall` |
`WebEngineView.TabloidExtra` |
`WebEngineView.ArchA` |
`WebEngineView.ArchB` |
`WebEngineView.ArchC` |
`WebEngineView.ArchD` |
`WebEngineView.ArchE` |
`WebEngineView.Imperial7x9` |
`WebEngineView.Imperial8x10` |
`WebEngineView.Imperial9x11` |
`WebEngineView.Imperial9x12` |
`WebEngineView.Imperial10x11` |
`WebEngineView.Imperial10x13` |
`WebEngineView.Imperial10x14` |
`WebEngineView.Imperial12x11` |
`WebEngineView.Imperial15x11` |
`WebEngineView.ExecutiveStandard` |
`WebEngineView.Note` |
`WebEngineView.Quarto` |
`WebEngineView.Statement` |
`WebEngineView.SuperA` |
`WebEngineView.SuperB` |
`WebEngineView.Postcard` |
`WebEngineView.DoublePostcard` |
`WebEngineView.Prc16K` |
`WebEngineView.Prc32K` |
`WebEngineView.Prc32KBig` |
`WebEngineView.FanFoldUS` |
`WebEngineView.FanFoldGerman` |
`WebEngineView.FanFoldGermanLegal` |
`WebEngineView.EnvelopeB4` |
`WebEngineView.EnvelopeB5` |
`WebEngineView.EnvelopeB6` |
`WebEngineView.EnvelopeC0` |
`WebEngineView.EnvelopeC1` |
`WebEngineView.EnvelopeC2` |
`WebEngineView.EnvelopeC3` |
`WebEngineView.EnvelopeC4` |
`WebEngineView.EnvelopeC5` | = `C5E`
`WebEngineView.EnvelopeC6` |
`WebEngineView.EnvelopeC65` |
`WebEngineView.EnvelopeC7` |
`WebEngineView.EnvelopeDL` | = `DLE`
`WebEngineView.Envelope9` |
`WebEngineView.Envelope10` | = `Comm10E`
`WebEngineView.Envelope11` |
`WebEngineView.Envelope12` |
`WebEngineView.Envelope14` |
`WebEngineView.EnvelopeMonarch` |
`WebEngineView.EnvelopePersonal` |
`WebEngineView.EnvelopeChou3` |
`WebEngineView.EnvelopeChou4` |
`WebEngineView.EnvelopeInvite` |
`WebEngineView.EnvelopeItalian` |
`WebEngineView.EnvelopeKaku2` |
`WebEngineView.EnvelopeKaku3` |
`WebEngineView.EnvelopePrc1` |
`WebEngineView.EnvelopePrc2` |
`WebEngineView.EnvelopePrc3` |
`WebEngineView.EnvelopePrc4` |
`WebEngineView.EnvelopePrc5` |
`WebEngineView.EnvelopePrc6` |
`WebEngineView.EnvelopePrc7` |
`WebEngineView.EnvelopePrc8` |
`WebEngineView.EnvelopePrc9` |
`WebEngineView.EnvelopePrc10` |
`WebEngineView.EnvelopeYou4` |
`WebEngineView.LastPageSize` | = `EnvelopeYou4`

This property was introduced in QtWebEngine 1.3.

See also WebEngineView::printToPdf().

RenderProcessTerminationStatus : enumeration `[since QtWebEngine 1.2]`

Describes the status with which the render process terminated:

Constant | Description
--- | ---
`WebEngineView.NormalTerminationStatus` | The render process terminated normally.
`WebEngineView.AbnormalTerminationStatus` | The render process terminated with a non-zero exit status.
`WebEngineView.CrashedTerminationStatus` | The render process crashed, for example because of a segmentation fault.
`WebEngineView.KilledTerminationStatus` | The render process was killed, for example by `SIGKILL` or task manager kill.

This property was introduced in QtWebEngine 1.2.

WebAction : enumeration `[since QtWebEngine 1.2]`

Describes the types of action that can be performed on a web page:

Constant | Description
--- | ---
`WebEngineView.NoWebAction` | No action is triggered.
`WebEngineView.Back` | Navigate back in the history of navigated links.
`WebEngineView.Forward` | Navigate forward in the history of navigated links.
`WebEngineView.Stop` | Stop loading the current page.
`WebEngineView.Reload` | Reload the current page.
`WebEngineView.ReloadAndBypassCache` | Reload the current page, but do not use any local cache.
`WebEngineView.Cut` | Cut the content currently selected into the clipboard.
`WebEngineView.Copy` | Copy the content currently selected into the clipboard.
`WebEngineView.Paste` | Paste content from the clipboard.
`WebEngineView.Undo` | Undo the last editing action.
`WebEngineView.Redo` | Redo the last editing action.
`WebEngineView.SelectAll` | Select all content. This action is only enabled when the page's content is focused. The focus can be forced by the JavaScript `window.focus()` call, or the focusOnNavigationEnabled setting should be enabled to get automatic focus.
`WebEngineView.PasteAndMatchStyle` | Paste content from the clipboard with current style.
`WebEngineView.OpenLinkInThisWindow` | Open the current link in the current window. (Added in Qt 5.6)
`WebEngineView.OpenLinkInNewWindow` | Open the current link in a new window. Requires a handler for the newWindowRequested() signal. (Added in Qt 5.6)
`WebEngineView.OpenLinkInNewTab` | Open the current link in a new tab. Requires a handler for the newWindowRequested() signal. (Added in Qt 5.6)
`WebEngineView.CopyLinkToClipboard` | Copy the current link to the clipboard. (Added in Qt 5.6)
`WebEngineView.CopyImageToClipboard` | Copy the clicked image to the clipboard. (Added in Qt 5.6)
`WebEngineView.CopyImageUrlToClipboard` | Copy the clicked image's URL to the clipboard. (Added in Qt 5.6)
`WebEngineView.CopyMediaUrlToClipboard` | Copy the hovered audio or video's URL to the clipboard. (Added in Qt 5.6)
`WebEngineView.ToggleMediaControls` | Toggle between showing and hiding the controls for the hovered audio or video element. (Added in Qt 5.6)
`WebEngineView.ToggleMediaLoop` | Toggle whether the hovered audio or video should loop on completetion or not. (Added in Qt 5.6)
`WebEngineView.ToggleMediaPlayPause` | Toggle the play/pause state of the hovered audio or video element. (Added in Qt 5.6)
`WebEngineView.ToggleMediaMute` | Mute or unmute the hovered audio or video element. (Added in Qt 5.6)
`WebEngineView.DownloadLinkToDisk` | Download the current link to the disk. To implement download actions, connect to the WebEngineProfile.downloadRequested signal. (Added in Qt 5.6)
`WebEngineView.DownloadImageToDisk` | Download the highlighted image to the disk. (Added in Qt 5.6)
`WebEngineView.DownloadMediaToDisk` | Download the hovered audio or video to the disk. (Added in Qt 5.6)
`WebEngineView.InspectElement` | Trigger any attached Web Inspector to inspect the highlighed element. (Added in Qt 5.6)
`WebEngineView.ExitFullScreen` | Exit the fullscreen mode. (Added in Qt 5.6)
`WebEngineView.SavePage` | Save the current web page to disk. (Added in Qt 5.7)
`WebEngineView.ViewSource` | Show the source of the current page in a new tab. Requires a handler for the newWindowRequested() signal. (Added in Qt 5.8)
`WebEngineView.ToggleBold` | Toggles boldness for the selection or at the cursor position. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.ToggleItalic` | Toggles italics for the selection or at the cursor position. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.ToggleUnderline` | Toggles underlining of the selection or at the cursor position. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.ToggleStrikethrough` | Toggles striking through the selection or at the cursor position. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.AlignLeft` | Aligns the lines containing the selection or the cursor to the left. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.AlignCenter` | Aligns the lines containing the selection or the cursor at the center. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.AlignRight` | Aligns the lines containing the selection or the cursor to the right. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.AlignJustified` | Stretches the lines containing the selection or the cursor so that each line has equal width. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.Indent` | Indents the lines containing the selection or the cursor. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.Outdent` | Outdents the lines containing the selection or the cursor. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.InsertOrderedList` | Inserts an ordered list at the current cursor position, deleting the current selection. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.InsertUnorderedList` | Inserts an unordered list at the current cursor position, deleting the current selection. Requires `contenteditable="true"`. (Added in Qt 5.10)
`WebEngineView.ChangeTextDirectionLTR` | Changes text direction to left-to-right in the focused input element. (Added in Qt 6.6)
`WebEngineView.ChangeTextDirectionRTL` | Changes text direction to right-to-left in the focused input element. (Added in Qt 6.6)

This property was introduced in QtWebEngine 1.2.

activeFocusOnPress : bool `[since QtWebEngine 1.2]`

Specifies whether the view should gain active focus when pressed. The default value is `true`.

This property was introduced in QtWebEngine 1.2.

audioMuted : bool `[since QtWebEngine 1.3]`

The state of whether the current page audio is muted.

This property was introduced in QtWebEngine 1.3.

See also recentlyAudible.

backgroundColor : color `[since QtWebEngine 1.2]`

Changes the color of the WebEngineView's background, behind the document's body. Can be set to `"transparent"` or to a translucent color to see through the document or to match the web content in a hybrid app to prevent the white flashes that may appear during loading.

The default value is white.

This property was introduced in QtWebEngine 1.2.

canGoBack : bool `[read-only]`

Returns `true` if there are prior session history entries, `false` otherwise.

canGoForward : bool `[read-only]`

Returns `true` if there are subsequent session history entries, `false` otherwise.

contentsSize : size `[read-only, since QtWebEngine 1.3]`

Size of the page contents.

This property was introduced in QtWebEngine 1.3.

devToolsId : WebEngineView `[read-only, since QtWebEngine 6.6]`

The id of the developer tools host associated with this page.

If remote debugging is enabled (see Qt WebEngine Developer Tools), the id can be used to build the URL to connect to the developer tool websocket: `ws://localhost:<debugggin-port>/devtools/page/<id>)`. The websocket can be used to to interact with the page using the DevTools Protocol.

This property was introduced in QtWebEngine 6.6.

devToolsView : WebEngineView `[since QtWebEngine 1.7]`

The view currently hosting the developer tools for this view. Setting it to a new view will navigate that view to an internal URL with the developer tools, and bind it to this view.

This property was introduced in QtWebEngine 1.7.

See also inspectedView.

history : WebEngineHistory `[read-only, since QtWebEngine 1.1]`

The navigation history of the current view.

This property was introduced in QtWebEngine 1.1.

See also WebEngineHistory.

icon : url `[read-only]`

An internal URL for accessing the currently displayed web site icon, also known as favicon or shortcut icon. This read-only URL corresponds to the image used within a mobile browser application to represent a bookmarked page on the device's home screen.

The following snippet uses the `icon` property to build an `Image` component:

     Image {
         id: appIcon
         sourceSize: Qt.size(32, 32)
         source: webView.icon != "" ? webView.icon : "fallbackFavicon.png";
         // ...
     }

Specifying the Image::sourceSize property informs the Qt WebEngine's favicon provider about the requested size and resizes the icon to it. If Image::sourceSize property is not specified, the provider provides the icon with the largest available resolution.

inspectedView : WebEngineView `[since QtWebEngine 1.7]`

The view this view is currently inspecting, if any. Setting it will navigate to an internal URL with the developer tools of the view set.

It is recommended to unset this property when developer tools are not visible; otherwise some debug information may appear in the inspected WebEngineView.

This property was introduced in QtWebEngine 1.7.

See also devToolsView.

isFullScreen : bool `[read-only, since QtWebEngine 1.1]`

Returns `true` if the web view is in fullscreen mode, `false` otherwise.

This property was introduced in QtWebEngine 1.1.

See also fullScreenRequested() and fullScreenCancelled().

lifecycleState : LifecycleState `[since QtWebEngine 1.10]`

The current lifecycle state of the page.

The following restrictions are enforced by the setter:

- A visible page must remain in the `Active` state.
- If the page is being inspected by a devToolsView then both pages must remain in the `Active` states.
- A page in the `Discarded` state can only transition to the `Active` state. This will cause a reload of the page.

These are the only hard limits on the lifecycle state, but see also recommendedState for the recommended soft limits.

This property was introduced in QtWebEngine 1.10.

See also recommendedState, Page Lifecycle API, and WebEngine Lifecycle Example.

loadProgress : int `[read-only]`

The amount of data from the page that has been loaded, expressed as an integer percentage in the range from `0` to `100`.

loading : bool `[read-only]`

Returns `true` if the HTML page is currently loading, `false` otherwise.

profile : WebEngineProfile `[since QtWebEngine 1.1]`

The current profile used for the view.

This property was introduced in QtWebEngine 1.1.

See also WebEngineProfile.

recentlyAudible : bool `[read-only, since QtWebEngine 1.3]`

Returns the current page's audible state (audio was recently played, or not).

This property was introduced in QtWebEngine 1.3.

See also audioMuted and recentlyAudibleChanged.

recommendedState : LifecycleState `[read-only, since QtWebEngine 1.10]`

The recommended limit for the lifecycle state of the page.

Setting the lifecycle state to a lower resource usage state than the recommended state may cause side-effects such as stopping background audio playback or loss of HTML form input. Setting the lifecycle state to a higher resource state is however completely safe.

This property was introduced in QtWebEngine 1.10.

See also lifecycleState, Page Lifecycle API, and WebEngine Lifecycle Example.

renderProcessPid : qint64 `[read-only, since QtWebEngine 1.11]`

Returns the process ID (PID) of the render process assigned to the current page's main frame.

If no render process is available yet, `0` is returned.

This property was introduced in QtWebEngine 1.11.

See also renderProcessPidChanged.

scrollPosition : point `[read-only, since QtWebEngine 1.3]`

Scroll position of the page contents.

This property was introduced in QtWebEngine 1.3.

settings : WebEngineSettings `[read-only, since QtWebEngine 1.1]`

Settings used by this view.

This property was introduced in QtWebEngine 1.1.

See also WebEngineSettings.

title : string `[read-only]`

The title of the currently displayed HTML page. This is a read-only value that reflects the contents of the `<title>` tag.

touchHandleDelegate : Component `[since QtWebEngine 6.4]`

The touchHandleDelegate provides a template defining visual touch handles instantiated by the view whenever touch selection handling is required.

The handle's position, opacity, and visibility are updated automatically. The delegate should be a QML Item or any QML type which inherits it.

Note: If no QML Item is set, the default touch handles will be shown.

The following code uses a custom touch handle delegate:

     WebEngineView {
     // ...
         touchHandleDelegate: Rectangle {
             color: "red"
         }
         // ...
     }

The touch handles can be also switched dynamically:

      Component {
         id: circleTouchHandle
         Rectangle {
             color: "blue"
             radius: 50
         }
     }
     function showDefaultHandle(isDefault) {
         if (isDefault)
             webEngineView.touchHandleDelegate = circleTouchHandle
         else
             webEngineView.touchHandleDelegate = null
     }

Note: If no delegate is provided, Chromium's default touch handles will appear.

This property was introduced in QtWebEngine 6.4.

url : url

The location of the currently displayed HTML page. This writable property offers the main interface to load a page into a web view. It functions the same as the `window.location` DOM property.

See also loadHtml().

userScripts : WebEngineScriptCollection `[read-only, since QtWebEngine 1.1]`

The user scripts' collection associated with the view.

This property was introduced in QtWebEngine 1.1.

See also WebEngineScriptCollection.

webChannel : QQmlWebChannel `[since QtWebEngine 1.1]`

The web channel instance used by this view. This channel is automatically using the internal QtWebEngine transport mechanism over Chromium IPC, and exposed in the javascript context of the page it is rendering as `qt.webChannelTransport`. This transport object is used when instantiating the JavaScript counterpart of QWebChannel using the Qt WebChannel JavaScript API.

Note: The view does not take ownership for an assigned webChannel object.

This property was introduced in QtWebEngine 1.1.

webChannelWorld : int `[since QtWebEngine 1.3]`

JavaScript world that the web channel instance used by this view is installed in. The world must be a number between `0` and `256`.

This property was introduced in QtWebEngine 1.3.

zoomFactor : real `[since QtWebEngine 1.1]`

Zoom factor for the view. Valid values are within the range from `0.25` to `5.0`. The default factor is `1.0`.

This property was introduced in QtWebEngine 1.1.

## Signal Documentation

`[since QtWebEngine 1.2]` activeFocusOnPressChanged(bool activeFocusOnPress)

This signal is emitted when the value of activeFocusOnPress changes. It specifies whether the view should gain active focus when pressed.

Note: The corresponding handler is `onActiveFocusOnPressChanged`.

This signal was introduced in QtWebEngine 1.2.

See also activeFocusOnPress and setActiveFocusOnPress().

`[since QtWebEngine 1.3]` audioMutedChanged(bool muted)

This signal is emitted when the value of muted changes. The value is specified using the audioMuted property.

Note: Not to be confused with a specific HTML5 audio / video element being muted.

Note: The corresponding handler is `onAudioMutedChanged`.

This signal was introduced in QtWebEngine 1.3.

See also audioMuted and recentlyAudibleChanged.

`[since QtWebEngine 1.4]` authenticationDialogRequested(AuthenticationDialogRequest request)

This signal is emitted when an authentication dialog is requested.

The request can be handled by using the methods of the AuthenticationDialogRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default dialog from showing up. Make sure to call either AuthenticationDialogRequest::dialogAccept() or AuthenticationDialogRequest::dialogReject() afterwards.

Note: The corresponding handler is `onAuthenticationDialogRequested`.

This signal was introduced in QtWebEngine 1.4.

`[since QtWebEngine 1.2]` backgroundColorChanged()

This signal is emitted when the web engine view background color changes.

Note: The corresponding handler is `onBackgroundColorChanged`.

This signal was introduced in QtWebEngine 1.2.

`[since QtWebEngine 1.1]` certificateError(WebEngineCertificateError error)

This signal is emitted when an invalid certificate error, error, is raised while loading a given request.

The certificate error can be handled by using the methods of the WebEngineCertificateError type.

Note: The corresponding handler is `onCertificateError`.

This signal was introduced in QtWebEngine 1.1.

`[since QtWebEngine 1.4]` colorDialogRequested(ColorDialogRequest request)

This signal is emitted when a color picker dialog is requested.

The request can be handled by using the methods of the ColorDialogRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default dialog from showing up. Make sure to call either ColorDialogRequest::dialogAccept() or ColorDialogRequest::dialogReject() afterwards.

Note: The corresponding handler is `onColorDialogRequested`.

This signal was introduced in QtWebEngine 1.4.

`[since QtWebEngine 1.4]` contextMenuRequested(ContextMenuRequest request)

This signal is emitted when a context menu is requested.

The request can be handled by using the properties of the ContextMenuRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default context menu from showing up.

Note: The corresponding handler is `onContextMenuRequested`.

This signal was introduced in QtWebEngine 1.4.

`[since QtWebEngine 1.1]` featurePermissionRequested(url securityOrigin, Feature feature)

This signal is emitted when the web site identified by securityOrigin requests to make use of the resource or device identified by feature.

Note: The corresponding handler is `onFeaturePermissionRequested`.

This signal was introduced in QtWebEngine 1.1.

See also grantFeaturePermission().

`[since QtWebEngine 1.4]` fileDialogRequested(FileDialogRequest request)

This signal is emitted when a file picker dialog is requested.

The request can be handled by using the methods of the FileDialogRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default dialog from showing up. Make sure to call either FileDialogRequest::dialogAccept() or FileDialogRequest::dialogReject() afterwards.

Note: The corresponding handler is `onFileDialogRequested`.

This signal was introduced in QtWebEngine 1.4.

`[since QtWebEngine 1.10]` findTextFinished(FindTextResult result)

This signal is emitted when a string search on a page is completed. result is the result of the string search.

Note: The corresponding handler is `onFindTextFinished`.

This signal was introduced in QtWebEngine 1.10.

See also findText() and FindTextResult.

`[since QtWebEngine 1.1]` fullScreenRequested(FullScreenRequest request)

This signal is emitted when the web page issues the request for fullscreen mode through the JavaScript API.

Note: The corresponding handler is `onFullScreenRequested`.

This signal was introduced in QtWebEngine 1.1.

See also isFullScreen.

`[since QtWebEngine 1.7]` geometryChangeRequested(rect geometry, rect frameGeometry)

This signal is emitted whenever the document wants to change the position and size of the page to frameGeometry. This can happen for example through JavaScript.

While frameGeometry includes, geometry excludes the size of frame margins.

Note: Geometry related properties of QML Window expect a size excluding the window decoration. You have to use geometry to handle this signal correctly.

     onGeometryChangeRequested: {
         window.x = geometry.x
         window.y = geometry.y
         window.width = geometry.width
         window.height = geometry.height
     }

Note: The corresponding handler is `onGeometryChangeRequested`.

This signal was introduced in QtWebEngine 1.7.

javaScriptConsoleMessage(JavaScriptConsoleMessageLevel level, string message, int lineNumber, string sourceID)

This signal is emitted when a JavaScript program tries to print a message to the web browser's console.

For example, in case of evaluation errors the source URL may be provided in sourceID as well as the lineNumber.

level indicates the severity of the event that triggered the message, that is, whether it was triggered by an error or a less severe event.

If no handler is specified, the view will log the messages into a `js` logging category.

Note: The corresponding handler is `onJavaScriptConsoleMessage`.

See also Console Logging.

`[since QtWebEngine 1.4]` javaScriptDialogRequested(JavaScriptDialogRequest request)

This signal is emitted when a JavaScript dialog is requested.

The request can be handled by using the methods of the JavaScriptDialogRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default dialog from showing up. Make sure to call either JavaScriptDialogRequest::dialogAccept() or JavaScriptDialogRequest::dialogReject() afterwards.

Note: The corresponding handler is `onJavaScriptDialogRequested`.

This signal was introduced in QtWebEngine 1.4.

linkHovered(url hoveredUrl)

Within a mouse-driven interface, this signal is emitted when a mouse pointer passes over a link, corresponding to the `mouseover` DOM event. This event may also occur in touch interfaces for `mouseover` events that are not cancelled with `preventDefault()`. hoveredUrl provides the link's location.

Note: The corresponding handler is `onLinkHovered`.

loadingChanged(WebEngineLoadingInfo loadingInfo)

This signal is emitted when a page load begins, ends, or fails.

When handling the signal with `onLoadingChanged`, various read-only parameters are available on the WebEngineLoadingInfo specified by loadingInfo.

Note: The corresponding handler is `onLoadingChanged`.

See also loading, LoadStatus, and ErrorDomain.

navigationRequested(WebEngineNavigationRequest request)

This signal is emitted when the navigation request request is issued.

Note: The corresponding handler is `onNavigationRequested`.

`[since QtWebEngine 2.0]` newWindowRequested(WebEngineNewWindowRequest request)

This signal is emitted when request is issued to load a page in a separate web engine view. This can either be because the current page requested it explicitly through a JavaScript call to `window.open`, or because the user clicked on a link while holding Shift, Ctrl, or a built-in combination that triggers the page to open in a new window.

The signal is handled by calling acceptAsNewWindow() on the destination view. If this signal is not handled, the requested load will fail.

An example implementation:

     QtObject {
         id: windowParent
         // Create the initial browsing windows and open the startup page.
         Component.onCompleted: {
             var firstWindow = windowComponent.createObject(windowParent);
             firstWindow.webView.loadHtml('<input type="button" value="Click!" onclick="window.open(&quot;http://qt.io&quot;)">');
         }

         property Component windowComponent: Window {
             // Destroy on close to release the Window's QML resources.
             // Because it was created with a parent, it won't be garbage-collected.
             onClosing: destroy()
             visible: true

             property WebEngineView webView: webView_
             WebEngineView {
                 id: webView_
                 anchors.fill: parent

                 // Handle the signal. Dynamically create the window and
                 // use its WebEngineView as the destination of our request.
                 onNewWindowRequested: function(request) {
                     var newWindow = windowComponent.createObject(windowParent);
                     newWindow.webView.acceptAsNewWindow(request);
                 }
             }
         }
     }

Note: The corresponding handler is `onNewWindowRequested`.

This signal was introduced in QtWebEngine 2.0.

See also WebEngineNewWindowRequest and WebEngine Quick Nano Browser.

`[since QtWebEngine 1.5]` pdfPrintingFinished(string filePath, bool success)

This signal is emitted when printing the web page into a PDF file has finished. filePath will contain the path the file was requested to be created at, and success will be `true` if the file was successfully created and `false` otherwise.

Note: The corresponding handler is `onPdfPrintingFinished`.

This signal was introduced in QtWebEngine 1.5.

See also printToPdf().

`[since QtWebEngine 1.8]` printRequested()

This signal is emitted when the JavaScript `window.print()` method is called or the user pressed the print button of PDF viewer plugin. Typically, the signal handler can simply call printToPdf().

Note: The corresponding handler is `onPrintRequested`.

This signal was introduced in QtWebEngine 1.8.

See also printToPdf.

`[since QtWebEngine 1.3]` recentlyAudibleChanged(bool recentlyAudible)

This signal is emitted when the page's audible state, specified by recentlyAudible, is changed, due to audio being played or stopped.

Note: The signal is also emitted when the audioMuted property changes. Also if the audio is paused, this signal is emitted with an approximate two-second delay, from the moment the audio is paused.

If a web page contains two videos that are started in sequence, this signal gets emitted only once, for the first video to generate sound. After both videos are stopped, the signal is emitted upon the last sound generated. This means that the signal is emitted both when any kind of sound is generated and when everything is completely silent within a web page, regardless of the number of audio streams.

Spurious signal emissions might also happen. For example, when sound is stopped, this signal gets emitted first with a value of `true`, and then with a value of `false`. Further, when audio starts playing, the signal is emitted twice with a value of `true`.

Note: The corresponding handler is `onRecentlyAudibleChanged`.

This signal was introduced in QtWebEngine 1.3.

See also recentlyAudible.

`[since QtWebEngine 1.7]` registerProtocolHandlerRequested(RegisterProtocolHandlerRequest request)

This signal is emitted when the web page tries to register a custom protocol by issuing a registerProtocolHandler request.

Note: The corresponding handler is `onRegisterProtocolHandlerRequested`.

This signal was introduced in QtWebEngine 1.7.

See also RegisterProtocolHandlerRequest.

`[since QtWebEngine 1.11]` renderProcessPidChanged(qint64 pid)

If no render process is available yet, `0` is returned. This signal is emitted when pid (process ID) of the page's underlying render process changed.

Note: The corresponding handler is `onRenderProcessPidChanged`.

This signal was introduced in QtWebEngine 1.11.

See also renderProcessPid.

`[since QtWebEngine 1.2]` renderProcessTerminated(RenderProcessTerminationStatus terminationStatus, int exitCode)

This signal is emitted when the render process is terminated with a non-zero exit status. terminationStatus is the termination status of the process and exitCode is the status code with which the process terminated.

Note: The corresponding handler is `onRenderProcessTerminated`.

This signal was introduced in QtWebEngine 1.2.

See also RenderProcessTerminationStatus.

`[since QtWebEngine 1.9]` selectClientCertificate(WebEngineClientCertificateSelection clientCertificateSelection)

This signal is emitted when a web site requests an SSL client certificate, and one or more were found in the system's client certificate store.

Handling the signal is asynchronous, and loading will be waiting until a certificate is selected, or the last copy of clientCertificateSelection is destroyed.

If the signal is not handled, clientCertificateSelection is automatically destroyed, and loading will continue without a client certificate.

Note: The corresponding handler is `onSelectClientCertificate`.

This signal was introduced in QtWebEngine 1.9.

See also WebEngineClientCertificateSelection.

`[since QtWebEngine 1.10]` tooltipRequested(TooltipRequest request)

This signal is emitted when the web page sends a request to show a tooltip at a specified position.

Note: Signal handlers need to call `request.accepted = true` to prevent a default tooltip from showing up.

Note: The corresponding handler is `onTooltipRequested`.

This signal was introduced in QtWebEngine 1.10.

See also TooltipRequest.

`[since QtWebEngine 6.3]` touchSelectionMenuRequested(TouchSelectionMenuRequest *request)

This signal is emitted when a touch selection menu is requested at a specified position.

The request can be handled by using the methods of the TouchSelectionMenuRequest type.

Note: Signal handlers need to call `request.accepted = true` to prevent a default touch selection menu from showing up.

Note: The corresponding handler is `onTouchSelectionMenuRequested`.

This signal was introduced in QtWebEngine 6.3.

See also TouchSelectionMenuRequest.

`[since QtWebEngine 1.3]` wasRecentlyAudibleChanged(bool wasRecentlyAudible)

This signal is emitted when the page's audible state, specified by wasRecentlyAudible, is changed, due to audio being played or stopped.

Note: The signal is also emitted when calling the setAudioMuted method.

Note: The corresponding handler is `onWasRecentlyAudibleChanged`.

This signal was introduced in QtWebEngine 1.3.

`[since QtWebEngine 6.7]` webAuthUxRequested(QWebEngineWebAuthUxRequest *request)

This signal is emitted when a WebAuth authenticator requires user interaction during the authentication process. These requests are handled by displaying a dialog to the user.

The request contains the information and API required to complete the WebAuth UX request.

Note: The corresponding handler is `onWebAuthUxRequested`.

This signal was introduced in QtWebEngine 6.7.

See also QWebEngineWebAuthUxRequest.

`[since QtWebEngine 1.2]` windowCloseRequested()

This signal is emitted whenever the page requests the web browser window to be closed, for example through the JavaScript `window.close()` call.

Note: The corresponding handler is `onWindowCloseRequested`.

This signal was introduced in QtWebEngine 1.2.

## Method Documentation

`[since QtWebEngine 2.0]` void acceptAsNewWindow(QWebEngineNewWindowRequest *request)

Handle the newWindowRequested signal by opening the request in this view.

This method was introduced in QtWebEngine 2.0.

See also newWindowRequested.

WebEngineAction action(WebAction action)

Returns a WebEngineAction for the specified WebAction action. WebEngineView also takes care of implementing the action, so that upon triggering the corresponding action is performed on the view.

     var copyAction = webEngineView.action(WebEngineView.Copy);

See also WebEngineAction.

`[since QtWebEngine 1.1]` void findText(string subString)

Finds the specified string, subString, in the page. The findTextFinished() signal is emitted when a string search is completed.

To clear the search highlight, just pass an empty string.

This method was introduced in QtWebEngine 1.1.

See also findTextFinished().

`[since QtWebEngine 1.1]` void findText(string subString, FindFlags options)

Finds the specified string, subString, in the page, using the given options. The findTextFinished() signal is emitted when a string search is completed.

To clear the search highlight, just pass an empty string.

     findText("Qt", WebEngineView.FindBackward | WebEngineView.FindCaseSensitively);

This method was introduced in QtWebEngine 1.1.

See also findTextFinished().

`[since QtWebEngine 1.1]` void findText(string subString, FindFlags options, variant resultCallback)

Finds the specified string, subString, in the page, using the given options. The findTextFinished() signal is emitted when a string search is completed.

To clear the search highlight, just pass an empty string.

The resultCallback must take an integer parameter. It will be called with the number of found occurrences of the subString.

     findText("Qt", WebEngineView.FindCaseSensitively, function(matchCount) {
         if (matchCount > 0)
             console.log("'Qt' tokens found:", matchCount);
     });

This method was introduced in QtWebEngine 1.1.

See also findTextFinished().

`[since QtWebEngine 1.1]` void fullScreenCancelled()

Immediately sets `isFullScreen` property to `false`. It can be used to notify the browser engine when the windowing system forces the application to leave fullscreen mode.

     ApplicationWindow {
         onVisibilityChanged: {
             if (webEngineView.isFullScreen && visibility != Window.FullScreen)
                 webEngineView.fullScreenCancelled()
         }

         WebEngineView {
             id: webEngineView
             // ...
         }
     }

This method was introduced in QtWebEngine 1.1.

See also isFullScreen and fullScreenRequested().

void goBack()

Go backward within the browser's session history, if possible. This function is equivalent to the `window.history.back()` DOM method.

See also canGoBack.

`[since QtWebEngine 1.1]` void goBackOrForward(int offset)

If offset is positive, goes forward the specified number of offset pages in the current session history. If offset is negative, it goes back. If the offset is invalid, the page is not changed.

This method was introduced in QtWebEngine 1.1.

See also goBack() and goForward().

void goForward()

Go forward within the browser's session history, if possible. This function is equivalent to the `window.history.forward()` DOM method.

`[since QtWebEngine 1.1]` void grantFeaturePermission(url securityOrigin, Feature feature, bool granted)

Sets or unsets the permission, depending on granted, for the web site identified by securityOrigin to use feature.

This method was introduced in QtWebEngine 1.1.

See also featurePermissionRequested().

void loadHtml(string html, url baseUrl)

Loads the specified html as the content of the web view.

This method offers a lower-level alternative to the `url` property, which references HTML pages via URL.

baseUrl is optional and used to resolve relative URLs in the document, such as referenced images or stylesheets. For example, if html is retrieved from `http://www.example.com/documents/overview.html`, which is the base URL, then an image referenced with the relative URL, `diagram.png`, should be at `http://www.example.com/documents/diagram.png`.

See also url.

`[since QtWebEngine 1.3]` void printToPdf(const string filePath, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation)

Prints the WebEngineView's current content to a PDF document and stores it under filePath. The document's size will be determined by the value of pageSizeId and its orientation will be determined using orientation.

This method issues an asynchronous request for printing the web page into a PDF and returns immediately. To be informed about the result of the request, connect to the signal pdfPrintingFinished().

If you leave out pageSizeId, it defaults to `A4`. If you leave out orientation, it defaults to `Portrait`.

This method was introduced in QtWebEngine 1.3.

See also pdfPrintingFinished().

`[since QtWebEngine 1.3]` void printToPdf(variant resultCallback, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation)

Prints the WebEngineView's current content to a PDF document and returns it in a byte array. The document's size will be determined by the value of pageSizeId and its orientation will be determined using orientation.

The resultCallback must take a string parameter. This string will contain the document's data upon successful printing and an empty string otherwise.

If you leave out pageSizeId, it defaults to `A4`. If you leave out orientation, it defaults to `Portrait`.

This method was introduced in QtWebEngine 1.3.

void reload()

Reloads the current page. This function is equivalent to the `window.location.reload()` DOM method.

See also reloadAndBypassCache().

`[since QtWebEngine 1.1]` void reloadAndBypassCache()

Reloads the current page, ignoring any cached content.

This method was introduced in QtWebEngine 1.1.

See also reload().

`[since QtWebEngine 1.3]` void replaceMisspelledWord(const QString &replacement)

Replace the current misspelled word with replacement.

This method was introduced in QtWebEngine 1.3.

void runJavaScript(string script, variant callback)

Runs the specified script in the content of the web view.

The callback parameter is optional. If a callback function is provided, it will be invoked after the script finishes running.

     runJavaScript("document.title", function(result) { console.log(result); });

Only plain data can be returned from JavaScript as the result value. Supported data types include all of the JSON data types as well as, for example, `Date` and `ArrayBuffer`. Unsupported data types include, for example, `Function` and `Promise`.

The script will run in the same world as other scripts that are part of the loaded site.

Warning: Do not execute lengthy routines in the callback function, because it might block the rendering of the web content.

For more information about injecting scripts, see Script Injection. For an alternative way to inject scripts, see WebEngineView::userScripts.

`[since QtWebEngine 6.6]` void save(const QString &filePath, QWebEngineDownloadRequest::SavePageFormat format)

Save the current web page to disk.

The web page is saved to filePath in the specified format.

This is a shortcut for the following actions:

- Trigger the Save web action.
- Accept the next download item and set the specified file path and save format.

This function issues an asynchronous download request for the web page and returns immediately.

This method was introduced in QtWebEngine 6.6.

See also QWebEngineDownloadRequest::SavePageFormat.

`[since QtWebEngine 1.2]` void setActiveFocusOnPress(bool arg)

Sets active focus to a clicked web engine view if arg is `true`. By setting it to `false`, a web engine view can be used to create a UI element that should not get focus. This can be useful in a hybrid UI.

This method was introduced in QtWebEngine 1.2.

See also activeFocusOnPress, activeFocusOnPressChanged, and WebEngineSettings::focusOnNavigationEnabled.

void stop()

Stops loading the current page.

`[since QtWebEngine 1.2]` void triggerWebAction(WebAction action)

Triggers the web action action.

This method was introduced in QtWebEngine 1.2.

See also WebAction.